Objective:
This document will guide you through the steps to be taken during ELA diagnostics. Here, we will describe a step by step to identify common issues with the EasyLinx Adapter.
Procedure:
The white LED labeled "Server" will display a flashing pattern that indicates specific diagnostics, depending on how many times it flashes:
2 flashes - "Host Connection Down"
3 flashes - "Slot Link Down"
4 flashes - "Slot not receiving ELA commands. Data connector reversed (wrong polarity) or Tx line (blue) not connected"
5 flashes - "Not Promoted"
6 flashes - "Validation Not Set"
7 flashes - "Low Wireless Signal"
Flashes are followed by a long pause.
Comments
0 comments
Article is closed for comments.